Programmable Features
Step Function Button 1 (On) Button 2 (Off)
1. Parking Light Operation Car Locator Feature Normal
2. Door Unlock Pulse Single Double
3. Auxiliary 2 Output Auxiliary 2 Horn Honk
4. Trunk Disarm Feature Disable Enable
5. Normal/Silent Arming Normal Silent
6. Auto Re-arm On Off
3
Default Reset
To reset all programmable features to their
factory default settings:
1. Turn ignition to the on position.
2. Wait 2 seconds.
3. Within 10 seconds press valet switch 5
times. The siren will give one long chirp
indicating the system is now in program
mode.
4. Press transmitter button 3.The siren will
chirp 3 times and all programmable
features will be reset to the On position.
Main Harness
• BLACK/WHITE WIRE - Dome light relay
polarity input (+/–). For negative polarity door
trigger vehicles connect this wire to ground. For
positive polarity door trigger vehicles, connect
this wire to +12V.
• BLACK/WHITE WIRE - Dome Light Relay
Output (+/–). Connect to the wire that activates
the vehicle’s dome light, usually the door pin
switch wire. NOTE:The dome light output may
usually connected to the same wire used for the
door trigger input (See GREEN and VIOLET
door trigger wires).
• ORANGE WIRE - Armed Output (–) 500mA.
Connect to a relay for optional circuit defeat
(See installation diagrams). The ORANGE wire
provides a ground when the unit is armed to
activate a fuel pump disable relay or other device
(i.e. window control module, etc.).
• GRAY WIRE - Auxiliary 1 Output (–) 500mA.
Connect to a relay for optional trunk release, etc.
(See installation diagrams). The GRAY wire
provides a ground output as long as the
transmitter button is pressed.
• GREEN WIRE - Negative Door Trigger Input
(–). Connect to the door switch circuit wire that
shows ground when the door is open.
• BLUE WIRE - Trunk/Hood trigger (-). Connect
the Blue wire to the trunk and/or optional hood
pin switches.The switch must provide a ground
output when switch is opened.
• VIOLET WIRE - Positive Door Trigger Input
(+). Connect to the door switch circuit wire
that shows +12V when the door is open. This
type of door circuit is usually found on Ford
vehicles.
• BROWN WIRE - Siren Output (+) 3A.
Connect to the siren’s red wire. Connect the
siren’s black wire to ground.
• WHITE WIRE - Parking Light Output (+) 15A
Relay. Connect to the wire that switches to
+12V when only the parking lights are turned
Commentaires sur ces manuels