Black Widow Security BW RAS 651 Manuel d'utilisateur Page 1

1STANDARD FEATURESSome of the system’s standard features include:• 4-button remote transmitter•Extended range receiver w/built-in LED statusindicator

10crank time setting has been increased byone step.6. Release the valet switch to exit.7. Test remote starter and if necessaryrepeat steps 1-6.Gas and

11DOOR LOCK RELAYSRELEVO DESEGUROS(-) LOCK - CIERRE(-) UNLOCK - ABRIRBLUE - AZULGREEN - VERDELOCK/UNLOCKSWITCHLULSWITCHABRIR/CERRAR(+) LOCK - CIERRE(+

12© 200564-651 9/05 Rev. 1Blue Ignition 1 input (+)Blue/White Tachometer inputPink Brake input (+)Red +12V Battery input (+)Green Accessory output (+)

2SILENT LOCKING/UNLOCKINGIf the optional Horn Honk feature is installed,pressing transmitter buttons 1&2 togetherprovides one-time silent operatio

3STOP AND GOThe Stop and Go feature allows the vehicle toremain running without use of the ignition keyduring short stops.To activate the Stop and Go

4REMOTE AUTO STARTOptional Keyless Entry Instructions IncludedBEFORE YOU BEGINThis system is compatible with electronicfuel injected engines only! No

5seconds after the ignition is turned off andanytime button 1 is used to lock the doors.• WHITE/BLUE WIRE - Horn output (-)250mA. Connect to an option

6• EMPTY - Not used.• BLUE WIRE - Unlock output (-) 500mA.4-Pin Blue Connector: Plug-in connector forextended range receiver.SYSTEM PROGRAMMINGEnterin

7operations for the parking light output:parkinglights turn on for 30 seconds with unlock,parking light output can be set to exchange pinlocations wit

8(-) Glow Plug Monitor / Gas Mode: For vehicleswith a wait-to-start wire that shows groundwhen the indicator light goes out, connect tothe proper vehi

9tach setting has been learned, or fourtimes to confirm the Smart Start modehas been learned. If the parking lights donot flash to confirm tach learni