Black Widow Security BW X-Z Series Instructions d'exploitation télécharger pdf (Page 2)

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.

• The parking lights will flash once.

• The doors will lock.*

• The LED will turn solid for 10 seconds

then start flashing slowly. After 10

seconds the system is armed.

During Arming, if the hood or trunk is open or

the brake pedal is pressed,the system will wait

10 seconds for the zone to close. If a door is

open the system will wait up to 60 seconds for

the zone to close (depending on door zone

setting during installation). If a zone remains

open after the wait period, the siren will chirp

and the parking lights will flash 4 times to

indicate the zone is still open. That zone will be

ignored, but keep all other areas remain

protected.

While Armed, the system will trigger if:

• The door, hood, or trunk is opened.

• The brake pedal is pressed.

• The shock sensor detects an impact.

• An optional sensor is disturbed.

When triggered by the door or hood/trunk

input the siren will sound or the horn will honk,

and the parking lights will flash for 30 seconds.

If triggered by a sensor,the alarm cycle will last

15 seconds. If the alarm is triggered while the

optional remote start is engaged, the remote

start will immediately shut down.

If a zone triggers the system 3 times during a

single arming cycle, the system will bypass that

zone, keeping the other zones protected, until

the next time the system is armed.

If the shock sensor detects a light impact to the

vehicle or an optional sensor is disturbed, the

system will chirp and the parking lights will flash

5 times to warn away the potential intruder.

Optional Feature

PASSIVE ARMING OPERATION

The passive arming feature allows the system to

arm automatically without user intervention.

This feature can be toggled on/off using the

transmitter.

To turn passive arming on/off:

1. Press and hold button 2 for level shift.

2. Press button 4.

• The system will enter passive arming

operation mode.

• The optional 2-way LCD transmitter

display will show “LAST DOOR ARM”.

To arm the system passively:

1. Turn the ignition key off.

2. Exit the vehicle and close all doors.

• The siren will chirp and parking lights

will flash once after closing the last door.

• The LED flashes rapidly indicating that

the system is preparing to arm. (The

system can be armed at any time by

pressing transmitter button 1.) NOTE:

Opening the hood/trunk or a door

resets the passive arming timer.

• After 30 seconds the siren will chirp to

indicate the system is armed.

• The parking lights will flash once.

• The doors will lock.†*

† If Passive Locking was enabled during installation.

DISARMING OPERATION

To disarm the system press transmitter button 2.

• The siren will chirp twice.¥

• The parking lights will flash twice.¥

• The doors will unlock.*

• The dome light will turn on.*

If the alarm was triggered while away, the system will respond

with 3 chirps and 4 parking light flashes.

* Optional Feature.

7250 rev 2 9-23.qxd 9/24/2004 12:54 PM Page 2

1 2 3 4 5 6 7 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Black Widow Security BW X-Z Series Instructions d'exploitation Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Les démarreurs à distance Black Widow Security BW X-Z Series